Traulsen G22010 Two-Section Reach-In Freezer — door gasket replacement and on-site fabrication across Chicago and the south and southwest suburbs. We size from the door, install stocked profiles same-day, and cut the rest on the truck.
Door gasket spec
Confirmed dimensions from our catalog — verified against your door before we install.
main door
22.75" × 59.75"
Specs
Gasket dimensions are sized from the physical door at the visit — model specs above are the starting point, not the cut.
Process
Common issues
Ice buildup around the door frame
A worn freezer gasket lets humid air in, which freezes on the frame and the gasket itself, worsening the leak.
Fix: Replace the gasket; on heated-wire doors verify the perimeter heater is intact before refitting.
Door freezing shut
A torn or stiff gasket lets moisture migrate to the seal, where it freezes and bonds the door to the frame.
Fix: Replace the gasket and check the heater wire and door alignment so the seal stays dry.
Frost on product near the door
Air infiltration past a bad seal carries moisture that frosts product stored near the opening.
Fix: Reseal the door and verify the dollar-bill test holds at the corners.
FAQ
The Traulsen G22010 door gasket measures 22.75" × 59.75" (replaces OEM part SVC-60059-00). We confirm against your door before installing. It's a 2-door unit, so the door count drives the gasket count.
Most Reach-In Freezer door gaskets run $150–$350 installed in Chicago. On a 2-door unit like this we estimate per door and bundle the visit.
Yes — we cut Traulsen gaskets on-site from magnetic and push-in extrusion stock carried on every truck, so a back-ordered or discontinued OEM part doesn't stop the repair.
The Traulsen G22010 door gasket cross-references OEM part SVC-60059-00. We match it by size and profile (22.75" × 59.75") rather than relying on the OEM stocking it — so a discontinued number is no obstacle.
More Traulsen