Delfield 6125-S Single-Section Reach-In — door gasket replacement and on-site fabrication across Chicago and the south and southwest suburbs. We size from the door, install stocked profiles same-day, and cut the rest on the truck.
Specs
Gasket dimensions are sized from the physical door at the visit — model specs above are the starting point, not the cut.
Process
Common issues
Hinge-corner gasket tearing
Repeated door slams delaminate the magnet from the vinyl at the hinge-side corners, the first spot to fail.
Fix: Replace the door gasket and check hinge tension and the door closer so the new gasket is not abused.
Door sweating and condensation
A hardened or compressed gasket breaks the seal, letting warm room air leak past the door and condense on the cabinet.
Fix: Replace the gasket and confirm a full seal with the dollar-bill test on every side.
Compressor running constantly
A failing door seal makes the box work harder to hold temperature, driving up run-time and energy cost.
Fix: Reseal the door; a fresh gasket usually restores hold-temp and cuts compressor cycling.
FAQ
Delfield 6125-S gaskets are sized to the door, not just the model — we confirm the exact width, height, and profile from the door before cutting or pulling stock. It's a single-door unit, so the door count drives the gasket count. Send the model number and a photo of the corner and we'll spec it.
Most Reach-In Refrigerator door gaskets run $150–$350 installed in Chicago. We estimate first from the model number, then schedule.
Yes — we cut Delfield gaskets on-site from magnetic and push-in extrusion stock carried on every truck, so a back-ordered or discontinued OEM part doesn't stop the repair.
More Delfield